Corner Nightstands – Placing a bedside table in the corner helps to use a difficult place to use. Nightstands in the corner are out of the way and less likely to be pushed. These side tables can be customized to fit any corner or bed height. The best way to preserve the materials to make this nightstand is to make a couple of corner nightstands at once. In this way, you can use the two halves of a board diagonal cut.
Instructions: 1 cut a board 1/2-by-16-by-16-inch amid a corner so the result is two equal triangles. Establish a triangle one side to another project. Stand January 3 1/2-by-1 messages 1/2-by-24-inch up on their ends and set the table triangle on top of them. Organize messages so that one is located in each corner of the triangle, each post about an inch from the corner. 2 Make two holes through the plate and in each triangle. Set a wood screw into each whole 2 inches and place the triangle together for positions completely tightening the screw with a drill. 3 Cut a table 1 by 18 by 18 inches in the middle corner nightstands of one corner to another so that there are two seals of equal triangles. Set aside. Adjust the other board face down on the work surface.