Easy To Build The Deck Railing Planter Box – This is very easily and quickly to build a deck railing planter box. Then, when you sit on your deck and enjoy the scenery, you can also enjoy your “hanging” garden. We will use a basic design size 3 foot by one foot, but you can vary the size according to your needs.
To build the deck railing planter box create first angle on your box. Place your 3-foot cedar boards on the edges of 3 feet of 8-inch cedar board. Make sure the edges are flush along both sides and with a screw gun and screws, attach the discs from the ground. Now you have two sides of a 6-inch wide box. Put two 6-inch by 6-inch cedar boards on the open sides. First, connect them to the base, and then on the sides of the 3-foot support. You now have a 6-inch wide and three feet long cedar box.
12 Photos Gallery of: Easy To Build The Deck Railing Planter Box
Whole through the bottom of the deck railing planter box for drainage, stagger these holes across the bottom. They should be approximately 2 inches apart. Place the box on the deck in the position you choose. Use of the 2-inch screws and screwdriver, attach this box to any part of the railing you want, make sure it is flush with the top. After filling with dirt and plant, depending on what you intend to plant, look up your box in the right location for the facility – either full sun, partial sun or mostly in the shade. Always use cedar boards for planter boxes like this, because the treated discs can poison your plants.basement ideas with openmstaircase