Sliding door lock bar – Sliding glass doors are practical for ducking in and out of the house and patio or garden. Sliding glass doors also acts as a gateway for fresh air to flow throughout the home. However, they are vulnerable to break-ins; and as a result, there are many sub-standard methods to unlock them. You can install a robust sliding glass door lock permanently, convenient to use and will not be misplaced or lost, as well as control rods, or other objects that are used to block the door.
Install a backwards sliding door lock bar, Place the locking mechanism at the lower edge of the sliding glass door. Place it flat against the edge of the door along the door track, according to the package directions. Push a marker by each of the two screw holes and mark the installation locations on the edge of the door. Hold the locking mechanism in place and push one hand while marking the spot where the tip of the lock bar strikes the stationary glass door. Remove the locking mechanism and set it aside.
12 Photos Gallery of: How to Install a Backwards Sliding Door Lock Bar
Use a hand-held drill to make holes with a diameter quoted in the lock manufacturer’s instructions. Drill exactly to the depth specified in the instructions to avoid hitting and breaking the glass in the door. Place the locking mechanism in place at the lower edge of the sliding door lock bar Insert a screwdriver bit into the drill and drive screws included with the locking mechanism in the holes and the edge of the door.